I、Main applications
Compared with tire stacker, crawler mobile stacker is favored by industrial and mining enterprises with harsh environment such as mines, aggregates and coal because of its outstanding site adaptability. The crawler stacker designed and manufactured by our company has the advantages of reliable performance, large capacity, high degree of automation, etc. The wide plate chain conveying design at the tail of the equipment can meet the direct feeding of dump trucks, avoiding the second transfer and stacking process of materials, and achieving cost reduction and efficiency improvement.
II、Features and Benefits
(1) The total power of the equipment is 89.5KW, and the effective power is 60KW. With external 380V alternating current, each kilowatt hour is calculated according to
the local unit price of 1.5 yuan (local actual unit price), and the stacking cost per cubic meter is 0.09 yuan. The diesel generator set is 90KW, and the average oil consumption is 28L per hour. According to the diesel 7 yuan /L, the stacking cost per cubic meter is 0.196 yuan. Compared with traditional excavators, the same running cost is reduced by 54%, a working capacity to replace 2-10 sets of traditional excavators, the purchase cost is reduced by 50%. Hourly fuel consumption is much smaller than wheel loaders. The size of conveyed material is less than 300mm (about 30cm below).
(2) Direct loader/truck unloading, up to 100 tons per load;
(3) Site adaptability and flexibility of movement;
(4) Complete dust removal/dust suppression measures, low work pollution;
(5) Complete electromechanical system integration;
(6) Can provide intermediate storage and control of conveyance flow;
(7) Working capacity up to 1000 m³/h (depending on the frequency of loading and unloading of tippers)
(8) Modular design, easier installation and spare parts replacement
III、Applications:
Cement, steel, electric power, quarry, harbor and other industries;
Support for ship loading/unloading at ports;
Direct unloading of road trucks, loaders, trains, etc;
IV、Configuration options
Feed widths from 3 to 6 meters;
Variety of chute types, infeed control, lightning protection and grounding options;
Dust control systems;
Electronic control panels to suit a wide range of customer requirements;
Full range of field instrumentation;
Dual power combination of diesel and electric motor drive;
Hydraulic lifting ramps for multi-directional feeding to improve unloading and conveying efficiency;
Dust removal measures: galvanization of the whole machine, dustproof cloth covering, telescopic chute dust removal, water spraying dust suppression system;
High load bearing plate chain belt;
V、Main technical parameters:
| No. | Name | Technical Parameter | Remark | |
| 1 | Machine size: (mm) | 19800x3000x3600 | ||
| 2 | Traveling track size: (mm) | 4650x500 | ||
| 3 | Stacking arm length: (mm) | 15200 | ||
| 4 | Folding stacking arm length: (mm) | 6000 | customizable | |
| 5 | Theoretical capacity: ( m³/h ) | 1000 | customizable | |
| 6 | Pitch angle of stacking arm ( ° ) | +21°, +5° | adjustable | |
| 7 | Stacker arm swivel angle (°) | ±65° | customizable | |
| 8 | Stacking height: (mm) | 7600 | customizable | |
| 9 | Material density: ( t/m³ ) | 0.7-3 | ||
| 10 | Maximum traveling speed | 0~3km/h | Variable speed | |
| 11 | Maximum length (working) | 27.9m | ||
| 12 | Maximum height (working) | 7.9m | ||
| 13 | Length (Transportation) | 19.8m | ||
| 14 | Width (Transportation) | 3.5m | ||
| 15 | Height (Transportation) | 3.6 | ||
| 16 | Transportation Suspension Length | 7.7m | ||
| 17 | Feeder Belt Conveyor | Belt width | 2200mm | |
| Belt parameters | Heavy Duty Flat Belt, EP630 4-Ply, Fabric Type | |||
| Scraper | Polyurethane sheets | |||
| Chain regulator | Disk spring tension bearings | |||
| Lower silo | Heavy Duty Spacer / Wheel | |||
| Belt | Chain and sprocket drives | |||
| 18 | Outfeed belt conveyor (non- extending) | Belt width | 1200mm | |
| Belt parameters | Heavy-duty flat belt,4-Ply | |||
| Scraper | Polyurethane sheets | |||
| Belt Pulley Adjustment | Standard threaded rod | |||
| 19 | Silo capacity of the feeder | 20m³ | ||
| 20 | Traveling track drive | 22kw | ||
| 21 | Silo feed belt drive | Electric motors - hydraulic pumps - motors | 60kw | |
| Folding Stacking Belt Drive | ||||
| 22 | Hydraulic pump station drive | 7.5kw | ||
| 23 | Drive pattern | hydraulic drive | ||
| 24 | Power source | Diesel or electric drive | ||
| 25 | Driving power of the whole machine | 89.5kw | ||
| 26 | Diesel engine power | 90kw | ||
| 27 | Machine weight | 38T | ||