Your current location:Home/Products/Bucket wheel excavator/JXLW-2000 Bucket Wheel Excavator

JXLW-2000 Bucket Wheel Excavator

Date:2024-06-27 Author:Shandong Mugu Industrial Co., Ltd. Views:398

I、Material Characteristics

ClassEarthrock /StrengthEarthrock / TypeIntensity Limit Fpr( MPa)Compressive Limit P (MPa)
ⅠHigh strength rockTough quartz and basalt20200
ⅡVery hard rockGranite, porphyritic quartz15150
ⅢHard rockGranite, hard sandstone, hard iron ore10100
ⅣComparatively hard rockOrdinary sandstone, iron ore660
ⅤMedium hard rockHard shale, soft sandstone and limestone440
ⅥSofter stoneSoft slate, very soft sandstone, fine sand, anthracite, surface-hardened gravel and sand220
ⅥⅡSofter stoneGravelly soils, gravel, hard fossil coals, hardened soils1.515
ⅦSoft stoneHard clay, soft fossil coal, sub-clay, hard lignite110
Ⅶ ⅡSoft stoneGravelly, coarse-grained, loamy soils0.8--
ⅧSoilTopsoil (or natural sandy soil), peat, sub-sand, sand0.6--
ⅨLoose soilSand, Disposal Soil, Soft Lignite0.5--
ⅩSlurry soilMud, mud loam0.3--


II、Specification of the whole machine

1. Rated reclaiming capacity: 2000m³/h

2. Height of reclaiming material: 10.0m

3. Power supply: diesel generator set, mains power; optional for customers. 

4. Power supply voltage: 220/380V;

5. Power supply frequency: 50HZ. 

III、Whole machine load

1. Total installed power: 980KW;

2. Total mass of equipment: 360T;

IV、Bucket wheel structure

1. Bucket wheel diameter: 7.6m;

2. Rotary speed of bucket wheel: 2~8r/min;

3. Number of buckets: 12;

4. Bucket capacity: 0.445m³ ;

5. Driving device form: motor-reducer;

6. Motor power: 550KW;

V、Bucket wheel luffing mechanism

1. Luffing mechanism: hydraulic overall amplitude;

2. Rising speed of luffing (center of bucket wheel): 4m/min; can be customized. 

3. Falling speed of luffing (center of the bucket wheel): 5m/min; can be customized. 

4. Pitch range: +12.8° ~ -13.2°; can be customized. 5. Driving unit type: motor - oil pump - double acting oil cylinder. 

VI、Main applications

Bucket wheel excavators are particularly suitable for application in open pit mines,large scale earthwork (e.g. roads, canals or dams) and storage yards. In open pit

mines, the selection of mining equipment depends on different mining scales. Thecombined units of different models are as follows:

  1. Giant bucket wheel excavator with conveyor bridge and transfer machine.

  2.  Bucket wheel excavator loading material to heavy trucks.

  3.  The unloading arm of the wheel bucket excavator feeds the conveyor to theworking surface.

  4.  The combined unit of wheel bucket excavator and transfer machine.

VII、Product highlights

1. The continuous productivity of bucket wheel excavator is high, the mining volume is large, the service life is long, so can get good economic benefits. 

2. Standardization, serialization, generalization, optimization of product manufacturing process, more conducive to maintenance and repair. 

3. High degree of electrical automation, realizing automatic control and remotecontrol. 

4. Has large cutting force, large digging capacity and high efficiency. 

VIII、Main technical parameters:

1.jpg

No.NameTechnical Parameter
1Theoretical capacity2000m³/h
2Rated bucket capacity0.445m³
3Bucket wheel diameter7.6m
4Number of bucket12
5Unit cutting force120kg/cm
6Rotary speed of bucket wheel2~8r/min
7Material loosening characteristics1.56t/m³ (Topsoil)
8Slewing angle of the unloading arm<br>relative to the reclaiming arm±105°
9Slewing angle of reclaiming arm360°
10Conveyor belt width1.4m
11Conveyor belt speed3m/s
12Telescopic Conveyor Telescopic Capacity10.5m
13Ground pressure140kpa
14Maximum travel speed of crawler8.5m/min
15Drive patternFluid power drive
16Power sourceDiesel or electric drive
17Bucket wheel driving power550kw
18Diesel engine power1332.8HP